Caring For Your Hitachi Simple Storage Modular; Migrating Data - Hitachi Simple Modular Storage 100 User Manual

Caring for Your Hitachi Simple Storage Modular

To keep your Hitachi Simple Modular Storage 100 operating at peek
performance, we recommend that you perform the following simple
maintenance tasks on a regular basis.
•
CAUTION! Do not pour or spray liquids directly onto your Hitachi
Simple Modular Storage 100.
• Clean the outside of your Hitachi Simple Modular Storage 100 with a
dry, lint-free cloth. Keep the cloth away from the array fans.
CAUTION! It is important to keep the front panel bezel and rear
panel clean. Otherwise, the array's internal temperature can
increase, causing the array to fail.
• Remove the front bezel (see
3-13). Then clean it with a dry, lint-free cloth and reattach the bezel
(see
• Keep the air vents clean and free from dust.

Migrating Data

Your Hitachi Simple Modular Storage 100 supports RAID 6. RAID 6 delivers
enhanced data protection compared by allowing for two simultaneous drive
failures without downtime or data loss.
In the unlikely event that a sufficient number of drive failures render your
Hitachi Simple Modular Storage 100 unusable, you can migrate your data to
a replacement array.
Performing array migration is straightforward using the Hitachi Simple
Modular Storage 100 Auto Migration Kit. The Kit comes with all the cables
and instructions you need to migrate data. For more information, please
visit the Hitachi Web Portal at http://support.hds.com. Instructions for
migrating data can also be found in the Auto Migration topic in the Storage
Navigator 2 online help.
•
TIP: Before you migrate data, you may want to print the relevant topics
from the Storage Navigator online help for reference.
Attaching the Front Panel Bezel on page
Maintaining Your Array
Hitachi Simple Modular Storage 100 User's Guide
Removing the Front Panel Bezel on page
3-12).
4–7