Hitachi Simple Modular Storage 100 User Manual page 70

• If your Hitachi Simple Modular Storage 100 is shown, the array is
faulty and should be replaced.
• If neither appears in the failure list window, a software failure may
have occurred. See "Unidentified failure has occurred"
page
•
7. If an entry appears in the failure parts list window, click Show Details
in the lower right corner of the screen for detailed information (see
Figure 5-3 on page
button.
5–4
5-5.
Figure 5-2: Example of the Failure Parts List Tab
5-5). To remove the information, click the Close
Troubleshooting
Hitachi Simple Modular Storage 100 User's Guide
Table 5-1 on