Moving Your Hitachi Simple Storage Modular; Before You Move Your Hitachi Simple Modular Storage 100; After Your Array Is In The New Location - Hitachi Simple Modular Storage 100 User Manual

Moving Your Hitachi Simple Storage Modular

This section contains critical information for avoiding damage when moving
your Hitachi Simple Modular Storage 100. Before moving your Hitachi
Simple Modular Storage 100 across the room or to another nearby location,
be sure to remove all cables from the back panel.

Before You Move Your Hitachi Simple Modular Storage 100

Before moving your Hitachi Simple Modular Storage 100 longer distances,
including moves that require an elevator or a ride in a vehicle, use the
following checklist as a general guide.
Do not clean your Hitachi Simple Modular Storage when moving the
array.
Make sure the new location for your Hitachi Simple Modular Storage
100 meets the requirements described under Preparing Your Site on
page 3-3.
Do not disconnect your Hitachi Simple Modular Storage 100's power
cable while the power is on or while the array's internal fans are
operating.
After turning off your Hitachi Simple Modular Storage 100, allow the
array to cool.
Disconnect all data and power cables after your Hitachi Simple Modular
Storage 100 has cooled.
Gather the documentation (CD-ROMs, user guide, quick-start guide).
Have at least three persons move your Hitachi Simple Modular Storage
100 to the new location.
For long distances, including those involving transportation in a vehicle,
place your Hitachi Simple Modular Storage 100 in its original packing
material and shipping container.

After Your Array is in the New Location

Complete the following tasks in order.
Connect all data and power cables to your Hitachi Simple Modular
Storage 100.
Make sure that your Hitachi Simple Modular Storage 100 is set up
correctly.
Make sure your applications and users can access data through your
Hitachi Simple Modular Storage 100.
Make sure your Hitachi Simple Modular Storage 100 can be accessed
using Storage Navigator Modular 2.
4–8
Maintaining Your Array
Hitachi Simple Modular Storage 100 User's Guide