Removing The Front Panel Bezel - Hitachi Simple Modular Storage 100 User Manual

•
Figure 3-5: Attaching the Front Bezel (Rack-Mount Installation)
CAUTION! It is important to keep the front panel bezel and rear
panel clean (see
4-7). Otherwise, the array's internal temperature can increase,
causing the array to fail.

Removing the Front Panel Bezel

To remove the front bezel, grasp the front bezel and gently pull it toward
you until it disengages from the four ball catches (two on each side).
Caring for Your Hitachi Simple Storage Modular on page
Installing Your Array
Hitachi Simple Modular Storage 100 User's Guide
3–13