Electrical Ingtallation; Grounding Requirements - Electric Dryer (Usa) - Electrolux EWED65HSS Installation Instructions Manual

10 Installation Instructions
Electrical installation
The following are specific requirements Tor proper
and safe electrical Installation of your dryer. Fallure WARNING
to fallow these Instructions can create electrical ELECTRIGAL SHOCK HAZARD
shock and/or a fire hazard. + AU.L.-approved strain liet must be Installed
onto paver cord. Ir the strain relet E not
À WARNING ill the x vus pulled out E ds і
ryer and сап be с any movement o f tna
ELECTRICAL SHOCK HAZARD ae
«тт D SR CE Па GRETA {тиииш cord, resulting In electrical shack.
Electrical shock can result It the dryer Is not * Do not use an aluminum wired receptacle with
property grounded. Follow the Instructions In a copper wired power cord and plug (or vica
pu ck шш n feto od] wel Sr Vien and aluminum and can cause electrical
` an The proper wiring and receptacle Is a
Some extenslon cords are not designed to copper ad ath ah with a copper wired
withstand the amounts of electrical current this receptacle.
dryer utilizes and can malt, creating electrical
shock and/or fre hazard. Locate the dryer
within reach of the receptacle for the length & NOTE
power cord to be purchased, allowing some :
| Dryers operating on 208 volt power supply will
slack In the cord. Refer to the pre-installation have longer drying times tnan dryers operating
urements In this manual tor tha F
sims cord to be purchased. pope on 240 volt power supply.
Grounding requirements - Electric dryer (USA)
For а grounded, cord-tonnected dryer:
AN WARNING 1. The dryer MUST be grounded. In tha event of
ELECTRICAL SHOCK HAZARD a malfunction or breakdown, grounding will
Improper connection of tne equipment grounding reduce the risk of electrical shock by a path of
conductor can result In а risk of electrical shock. least resistance for electrical current.
Check with a licensed electrician If you are In 2, After you purchase and Install a 3 wire or 4
doubt as to whether the appllance ls properly wire power supply cord having an equipment-
grounded. grounding conductor and a grounding plug
that matches you wiring system, the plug
MUST be plugged Into an appropriate, copper
Wired receptacle that is property Installed and
grounded In accordance with all local codes and
ordinances. If In doubt, call a licensed electrician.
DO NOT тоду the plug you've Installed on this
appllanca.
For a permanently connected dryer:
1. The dryer MUST be connected to a grounded
metal, pamnanent wiring system; or an
equipment grounding conductor must be run
with the creut conductors and connected to
the aequipmant-grounding terminal or lead on
inia appllanca.