Configuring The Dryer Wireless Connection - Electrolux EDH9000W3 User Manual

5.2 Configuring the dryer wireless connection

Have My Electrolux downloaded and installed on your smart
device.
1. Press the on/off button for a few seconds to activate the
appliance.
2. Select a programme by turning the programme dial.
3. Press and hold Time Dry and Delay Start touch buttons for 3
seconds .
The text pop up for about 5 seconds and the icon
flashing and wireless module begins starting up. It may takes about
45 seconds before it is ready. When the wireless module is ready,
the text (Access Point) is on to inform you, that the access
point will be open for about 3 minute.
4. Configure the My Electrolux app on your smart device.
5. If the connectivity is configured,
and the icon
the configuration was successful.
Every time you switch the appliance on, the appliance takes
45 seconds to connect to the network automatically. When
the indicator
To switch the wireless connection off, press and hold Time Dry
and Delay Start touch buttons for 3 seconds until the first acoustic
signal: appears on the display.
If you switch the appliance off and on again, the wireless
connection is automatically off.
To remove the wireless credentials, press and hold Time Dry
and Delay Start touch buttons for 10 seconds until the second
acoustic signal:
WI-FI - CONNECTIVITY SETUP
will stop blinking and lit steadily to confirm that
stops blinking the connection is ready.
appears on the display.
(Access Point) symbol is off
starts
17/52