Condensate Dryer; Installation Of Ventilating System - Electrolux T4130 Installation Manual

12

Condensate dryer

The condensate dryer does not have
ventilation (evacuation) into the open.
The air is circulated in a closed system
between the dryer and condensing unit.
The water in the garments condenses in the
condensing unit.
All the energy (3,4/2,4 kW) used for drying
the garments ends up in the room in the
form of heat.
During operation, the room experiences
a temperature increase, which results in
a need for ventilation.
The moisture ends up as water in the
drains.
Fig Note! The hose must be "sloping"
towards the drain and not form a water
1
trap.

Installation of ventilating system

For ventilation, a thermostatically
controlled fan, type EQ 250, is
used. It can be ordered as item
no. 988 80 20 43.
Fig The fan is to be placed on a
wall facing the outside behind
2
the condensate dryer, while the
thermostat is placed further into
the room in an accessible place.
The fresh air intake must end
in the room in front of the dryer,
positioned diagonally from the fan.
Pressure drop max.: 10 Pa.
The fresh air requirement
per dryer is 750 m3/h (if the
temperature is kept constant).
The need for fresh air varies and is controlled
by the thermostat.
Condensate dryer
2
1