36" Gas Range; Removing Backguard Glass And Trim; Removing Control Buttons; Removing Electronic Oven Control - Electrolux Next Gen 30" Service Manual

36" RANGE
Backguard glass and trim:
1. Disconnect power from range.
2. Remove four screw two from the ends, and two from
the top and pull the glass and trim forward.
Backguard screws
Control buttons:
1. The control buttons are rubber and snap into the
backguard glass.
Control buttons
Electronic oven control:
1. Disconnect power from range and remove the
backguard glass.
2. Remove the four screws holding the control to the
brackets.
Electronic oven control mounting screws
3. Pull the control forward, mark and disconnect the
wires from the terminals and unplug eight pin plug.
Fluorescent lamp starter:
1. Disconnect power from range and remove the
backguard glass.
2. The starter base is mounted into the left bracket
that holds the electronic oven control. Push in and
turn the starter counter clockwise.
Starter base:
1. Disconnect power from range, remove the backguard
glass, electronic oven control and starter.
113
Lamp starter