To Set The Control For The Self-Cleaning Cycle To; Start Immediately And Shut Off Automatically; When The Self-Clean Cycle Is Complete; Stopping Or Interrupting A Self-Cleaning Cycle - Electrolux Next Gen 30" Service Manual

To Set the Controls for the Self-Cleaning Cycle To

Start Immediately and Shut Off Automatically:

1. Be sure the clock shows the correct time of day and
the oven door is closed.
2. Press Clean. "CLEAN" will flash and "3:00" will show
in the display. If a 2 or 4 hour clean is desired use
the number pads to enter the time. Set the cleaning
time based on the amount of soil in the oven—light,
medium or heavy.
3. Press Start. The "DOOR LOCKED" icon will flash;
"CLEAN" icon and the letters "CLn" will remain on in
the display.
4. As soon as the controls are set, the motor driven
oven door lock will begin to close automatically and
once the door has been locked the "DOOR LOCKED"
indicator light will quit flashing and remain on. Also
the oven icon will show in the display.
Note: It takes about 15 seconds for the oven door lock
to close.

When the Self-Clean Cycle has Completed:

1. Only the time of day and the word "DOOR LOCKED"
will remain in the display.
2. Once the oven has cooled down for approximately 1
hour, and the word "DOOR LOCKED" shown in the
display has gone out, the oven door can then be
carefully opened.

Stopping or Interrupting a Self-Cleaning Cycle:

If it becomes necessary to stop or interrupt a self-cleaning
cycle due to excessive smoke or fire in the oven:
1. Press Clear Off.
2. Once the oven has cooled down for approximately 1
hour and the "DOOR LOCKED" icon is no longer
displayed, then the oven door may be opened.
To Set the Controls for the Self-Cleaning Cycle To
Start at a Delayed Time and Shut off Automatically
(example 3 hour self-clean cycle to finish at 9:00):
1. Be sure the clock shows the correct time of day and
the ovendoor is closed.
2. Press Clean. "CLEAN" will flash and "3:00" (default
3 hour clean cycle) will show in the display. If a 2 or
4 hour clean is desired use the number pads to
enter the time. Set the cleaning time based on the
amount of soil in the oven—light,medium or heavy.
3. Press Start. The "DOOR LOCKED" icon will flash;
"CLEAN" icon and the letters "CLn" will remain on in
the display.
4. Press Stop Time. Enter the desired Stop Time using
the number pads 9 0 0.
5. Press Start. The "CLn" icon will turn off; "DELAY",
"DOOR LOCKED" and "CLEAN" icons will remain
on.
6. As soon as the controls are set, the motor driven
oven door lock will begin to close automatically and
once the door has been locked the "DOOR LOCKED"
indicator light will quit flashing and remain on.
7. The control will calculate backward from the set stop
time to determine when the self-cleaning cycle
should begin. The self-cleaning cycle will come on
automatically at the calculated time. At that time,
the icon "DELAY" will go out; "CLEAN" and "CLn"
will appear in the display.
When the Self-Clean Cycle has Completed:
1. Only the time of day and the word "DOOR LOCKED"
will remain in the display.
2. Once the oven has cooled down for approximately 1
hour, and the word "DOOR LOCKED" shown in the
display has gone out, the oven door can then be
carefully opened.

HOW THE ES 450 OPERATES

The ES 450 electronic oven control system is made up
of three parts that control the bake and broil burners, and
the locking of the door in clean.
1. Electronic oven control.
2. Oven temperature sensor.
3. Oven door lock mechanism.

PREHEAT

When the preheat pad is touched, and a temperature is
programmed with the number pads, the broil relay on the
board closes, applying line to neutral voltage across the
broil circuit for the first six minutes. The display will show
"Pre" and "Bake". The broil circuit is a series circuit made
up of the electronic oven control, a silicon carbide igniter
that reduces in resistance as it heats up, and a current
sensitive oven safety valve that needs a minimum of 3.2
amps of current to open. When electrical power is first
78