Removing Broil Burner And Baffle (Self-Clean Models); Removing Broil Igniter; Removing Oven Vent (Self-Clean Models); Removing Oven Safety Valve (Self-Clean Models) - Electrolux Next Gen 30" Service Manual

2. Remove the fan cover.
3. Remove the two screws holding the element to the
oven liner.
4. Pull the element into the oven and disconnect the
wires.
Removing broil burner and baffle (self-cleaning
models):
1. Remove the five screws holding the burner and baffle
to the top of the oven and lift the burner off the spud.
Broil burner and baffle screws
Removing burner baffle from broiler burner:
1. Using a 3/8" socket remove the nut holding the baffle
to the burner.
Burner baffle nut
Removing broiler igniter
1. Disconnect electrical power from the range.
2. Remove the broiler burner and baffle.
3. Remove the two screws holding the igniter to the
oven liner and pull the igniter forward.
Igniter screws
4. When replacing the igniter, the replacement igniter
will come as a kit. The kit will have an igniter with
short wires and two ceramic wire nuts. It will be
necessary to cut and splice the wires.

Removing oven vent (self-clean models):

1. Remove the main top and burner pan.
2. Remove the broiler burner and baffle.
3. Remove four screws holding vent to the oven liner
and roll the top of the vent forward.
Vent screws
Removing oven safety valve: (self-clean models)
1. Disconnect electrical power and turn off the gas to
the range.
2. Go to the rear of the range and using a 9/16" wrench
disconnect the tubing at the safety valve that goes
to the broiler burner.
106