Range Technical Data; Maximum Allowable Surface Temperatures; Rtd Temperature / Resistance Chart; Gas Range Component Resistance Chart - Electrolux EW30GF65G Series Product & Training Manual

MAxIMUM ALLOWABLE SURFACE TEMPERATURES

All gas and electric ranges must comply with U.L and A.N.S.I. surface temperature limits outlined in the following chart.
Note that the testing temperature is different for electric ranges produced after 08/26/2003.
SURFACE TEMPERATURE LIMITS
1. Product must be undamaged, correctly assembled and have the cor-
rect oven temperature.
2. All skin temperatures are based on a room temperature of 77° F (25° C)
and an oven set temperature as specified below:
For ELECTRIC ranges built prior to 08/26/2003 - 400° F
For ELECTRIC ranges built after 08/26/2003 - 475° F
For GAS ranges built prior to 01/01/2004 - 400° F
For GAS ranges built after 01/01/2004 - 475° F
3. Oven must be cycling at designated test temperature for one hour
before test is conducted.
4. Pyrometers, (temperature testers), must be of high quality and properly
adjusted.
5. An increase or decrease of 1° F in the room ambient temperature, will
allow a 1° F increase or decrease in the maximum allowable surface
temperature of the range.

RTD TEMPERATURE / RESISTANCE CHART

The chart seen here can be used to test the resistance of the oven
temperature sensor probe. For accuracy in testing use a high quality
thermometer or temperature meter to determine actual oven temperature
before reading the resistance of the probe.

Gas Range Component Resistance Chart

NOTE: RESISTANCE MEASUREMENTS ARE APPROxIMATE. VARIATIONS DUE TO TEMPERATURE CHANGES
AND OTHER FACTORS ARE NORMAL.
COMPONENT
WARMER DRAWER ELEMENT
WARMER DRAWER ELEMENT
MINI OVEN ELEMENT
CONVECTION ELEMENT
CONVECTION ELEMENT
CONVECTION FAN MOTOR
WINDINGS
LOCK MOTOR WINDINGS
GAS SAFETy VALVE
BAKE IGNITOR
BROIL IGNITOR
OVEN TEMPERATURE SENSOR
PROBE (AT ROOM TEMPERATURE)
** Never apply line voltage to the oven safety valve terminals.

RANGE TECHNICAL DATA

GAS RANGE COMPONENT RESISTANCE CHART
PAINTED
LOCATION
Side Panel 152° F
Oven Door 152° F
Warmer Drawer 152° F
Front Panel
Knobs & Handles —
Skirt —
Cooktop
Lower Console
Oven Vent Area
†
Includes plastic with metal plating not more than 0.005" thick and metal with a plastic covering not
less than 0.005" thick.
* Self-Clean Gas Range at Clean Temperature
** Self-Clean Electric Range at Clean Temperature
VOLTAGE WATTAGE
RATING
108 / 132 700
108 / 132 450
108 / 132 1000
108 / 132 350
108 / 132 200
108 / 132
108 / 132
**
108 / 132
108 / 132
-
Page 5
MATERIAL TyPE / FINISH
PORCELAIN GLASS
PLASTIC
160° F —
160° F 172° F
160° F —
— — *167° F
**182° F
— —
NO TEMPERATURE LIMITS APPLy TO THIS AREA
RTD SCALE
TEMPERATURE °F
32 ± 1.9
75 ± 2.5
250 ± 4.4
350 ± 5.4
450 ± 6.9
550 ± 8.2
650 ± 13.6
900 ± 13.6
ResistAnCe Ω (ohms)
20.5 Ω
32 Ω
14 Ω
40 Ω
72 Ω
35 Ω
2000 Ω
1.5 Ω
100 Ω
80 Ω
1100 Ω *
*( )
refer to rtd chart
† METAL
— —
182° F —
— —
131° F
**152° F
*182° F *152° F
RESISTANCE Ω
1000 ± 4.0
1091 ± 5.3
1453 ± 8.9
1654 ± 10.8
1852 ± 13.5
2047 ± 15.8
2237 ± 18.5
2697 ± 24.4