Removing Burner Pan; Removing Top Burner Igniter Switches; Removing Top Burner Valve - Electrolux Next Gen 30" Service Manual

Removing burner pan:

1. Disconnect electrical power and turn the gas supply
off.
2. Remove the main top and manifold panel.
3. Remove the two main top locater pins using a 3/16"
socket.
Locator pin and 3/16" socket
4. Remove the eleven screws holding the burner box to
the manifold pipe, the bodysides, and back flange.
Burner pan screws
5. Lift the burner pan up and off.
Removing the top burner igniter switches:
Note: The four switches and the harness are an
assembly and are changed as an assembly.
1. Disconnect electrical power.
2. Remove the manifold panel and burner pan.
3. Pull the switches off the shafts of the valves.
Igniter switches
4. Disconnect the red lead from the spark module and
use the disconnect in the harness to disconnect the
black lead.
Removing the top burner valves:
1. Disconnect electrical power and turn the gas supply
off.
2. Remove the main top, manifold panel and burner
pan.
3. Using a 1/2" wrench disconnect the burner tubing
from the valve.
Disconnecting burner tubing
4. Remove the bolt holding valve to the manifold
with a 1/4" socket.
s
Valve bolt
Note: When reinstalling the valve besure the gasket
between the valve and manifold is in place.
Valve mounting gasket
100