Electrolux Next Gen 30" Service Manual page 126

Twelve burner pan screws
Oven valve cover:
1. Remove the storage drawer.
2. Remove the two screws holding the cover to the valve
shelf.
Valve cover screws
Oven safety valve:
1. Turn off the gas and disconnect power to the range.
2. Remove the storage drawer, bake burner and safety
valve cover.
Disconnect tubing at back of safety valve
3. From the rear of the range using a 5/8" wrench,
disconnect the tube that goes between the safety
valve and the broil burner at the safety valve.
4. From the front of the range using a 5/8" wrench,
disconnect the tube that comes from the manifold
to the safety valve at the safety valve.
Disconnect tubing from front
5. Remove the two screws holding the safety valve
bracket to the rear brace of the range, pull the valve
forward and disconnect the wires from the valve.
Safety valve mounting screws
Broil burner:
1. Remove the two screws holding the broil burner igniter
to the broil burner.
126