To Change The Minute Timer While It Is In Use; To Cancel The Minute Timer Before The Set Time Has Run Out; To Set The Controls For Bake; To Change The Oven Temperature After Baking Has Started - Electrolux Next Gen 30" Service Manual

4. When the set time has run out, the timer will beep 3
times. It will then continue to beep 3 times every 60
seconds until Timer On/Off is pressed.
Note: The minute timer does not start or stop cooking.
It serves as an extra timer in the kitchen that will beep
when the set time has run out. The minute timer can be
used alone or during any of the other oven functions.
When the minute timer is in use with any other function,
the minute timer will be shown in the display. To view
other functions, press the pad for that function.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display,
press and hold the Up Arrow or Down Arrow to
increase or decrease the time.
To Cancel the Minute Timer before the set time has
run out:
Press Timer On/Off.
To Set or Change the Temperature for Baking:
The oven can be programmed to bake at any
temperature from 170°F to 550°F (65°C to 287°C).
To Set the Controls for Baking:
1. Press Bake. "— — —" appears in the display.
2. Within 5 seconds, press the Up Arrow or Down
Arrow . The display will show "350°F (177°C)". By
pressing and holding the Up Arrow or Down
Arrow, the temperature can then be adjusted in
5°F (1°C) increments.
3. As soon as the Up Arrow or Down Arrow is
released, the oven will begin heating to the selected
temperature. When the displayed temperature
reaches the desired baking temperature, the control
will beep 3 times.
4. To cancel the baking function, press Clear Off .
To Change the Oven Temperature after Baking has
Started:
1. Press Bake and make sure the bake temperature
is displayed.
2. Press the Up Arrow or Down Arrow to increase
or decrease the set temperature.
To Set Control for Continuous Bake or 12 Hour
Energy Saving:
The oven control has a built-in 12 Hour Energy Saving
feature that will shut off the oven if the control is left on
for more than 11 hours and 59 minutes. The oven can
be programmed to override this feature for continuous
baking.
To set control for continuous baking:
1. Press Timer On/Off, "0:00" will appear in the
display.
2. Press and hold Timer On/Off down for 5 seconds
until tone is heard, " — — hr" will appear in display
for continuous cooking. The current time of day will
return to the display.
3. To cancel the Continuous Bake function, press
Timer On/Off and hold for 5 seconds until tone is
heard. "12hr" will appear in display indicating that the
control has returned to the 12 Hour Energy Saving
feature.
To Set Control for Oven Lockout:
The control can be programmed to lock the oven door and
inactivate the oven controls.
To set Control for Oven Lockout feature:
1. Press Clear Off and hold for 3 seconds. "Loc" will
appear in display, the "Door Locked" indicator light
will flash and the motor driven door lock will begin to
close automatically. DO NOT open oven door
while the indicator light is flashing. Allow about 15
seconds for the oven door to lock. Once the oven
door is locked, the current time of day will appear in
the display.
2. To cancel the lockout feature, press Clear Off and
hold for 3 seconds. The control will unlock the oven
door and resume normal operation.

To Set the Timed Bake Feature:

The BAKE TIME and STOP TIME controls operate the
Timed Bake feature to turn the oven on and off at the
times you select in advance. The oven can be
programmed to start immediately and shut off
automatically or to begin baking at a later time with an
automatic shutoff.
52