Table of Contents
Advertisement
Two screws
3. Remove one screw holding the end cap to theback
shield, one screw holding the end cap to the top of
the side panel and lift the end cap up.
Two screws
To remove the main top:
Ranges with standard top burners:
1. Lift the front of the main top and disengage the lift
and lock rods.
2. Lift the top up and forward.
Lift and lock rod
Ranges with sealed burners:
1. Lift off the four burner caps and heads.
Burner cap and head
2. Remove the two screws from each burner holding
burner base to the main top.
Two screws at each burner
Page 98
Advertisement
Table of Contents
Troubleshooting
