Cushion Lever - Suzuki DR350 Service Manual

6·31 CHASSIS
CAUTION:
00 not attempt to remove the bolts, right and left . Swin-
garm is not disassembly .
CUSHION LEVER
Inspect the respective cushion lever bearings by hand while
they are in the cushion lever.
Rotate each bearing spacer to inspect for abnormal noise
and smooth rotation. Replace the bearing if there is anything
unusual. Inspect the dust seals .
If
they are found to be
damaged, replace them with new ones .
• Remove the dust seals and spacers .
• Remove the bearings with the specia l tools and proper
tool.
09923-74510: Bearing remover
09930-30102 : Sliding shaft
Inspect the swingarm pivot shaft runout with the dial gauge.
The swingarm pivot shaft must be replaced if the runout ex-
ceeds the limit.
Service Limit : 0 .3 mm 10.01 in)
09900-20606 : Dial gauge I I ' I 00 mmJ
09900-20701 : Magnetic stand
09900-21304 : V-block