Cylinder Head Cover - Suzuki DR350 Service Manual

3-45 ENGINE
• Engage the chain on the cam sprocket with the locating
pin hole
CD
two o'clock position .
NOTE:
Do not rotate the magneto rotor while doing (Ms. When the
sprocket is not positioned correctly. turn the sprocker. When
installing the camshaft into the cam sprocket; pay attention
not to dislodge the locating pin or
it
may fa/l into the
crankcase.
• Align the engraved line mark
®
on the camshaft so
it
is
parallel with the surface of the cylinder head.
• Fit the lock washer
®
so that it is covering the locating
pin .
• Apply THREAD LOCK SUPER" 1303" to the cam sprock-
et bolts and tighten them to the specified torque .
99000-3 2030 : THREAD LOCK SUPER " 1303"
Tightening torque: 14 - 16 N 'm
(1 .4 -1. 6 kg-m . 10.0 - 11 .5 Ib-It)
• Bend up the washer tonque positively to lock the bolts.
• Apply SUZUKI MOLY PASTE to the camshaft journals and
cam faces _
99000-25140 : SUZUKI MOLY PASTE
CYLINDER HEAD COVER
• Thoroughly wipe off oil from the fitting surfaces of
cylinder head and cover.
• Fit the two dowel pins to the cy linder head .
• Unilormly apply SUZUKI BOND No. 1207B/ 1215 to the
cylinder head cover surface.
99 104-3 1140 : SUZUKI BONO No. 1207B (U .S.A .)
9 9000-3 1110 : SUZUKI BOND No . 1215 (Others)