Suzuki DR350 Service Manual page 36

• Place a clean rag over the cylinder base to prevent the
piston pin circlips from dropping into crankcase. Remove
the piston pin circlips with long-nose pliers .
• Remove the piston pin with a proper drift .
• Loosen the magneto rotor nut with a 27 mm box-end
wrench .
• Remove the magneto rotor with the special tooL
099 3 0 -34960: Rotor remover
• Remove the key
CD.
• Remove the clutch cover.
• Remove the clutch spring mounting bolts diagonally.
• Remove the pressure plate along with the clutch release
bearing and rack .
• Remove the several c lutch drive and driven plates.
ENGINE 3·8