Suzuki DR350 Service Manual page 296

13·39 DR35DRISER ('94·MDDELI
• Remove the inner rod.
CAUTION :
Do not attempt to disassemble the inner rod . It is not serv-
iceable.
• Remove the boot by loosening the clamp screws.
• Remove the dust seal
<D.
• Remove the oil seal stopper ring
®.
• Separate the in ner tube from the outer tube .
CAUTION :
• When separating the inner tube from the outer tube . both
antifriction metals may be damaged and must be replaced
with new ones.
* The removed oil seal should be replaced with a new one .
-
-
•