Suzuki DR350 Service Manual page 37

3·9 ENGINE
• Fl atten the lock washer and remove the clutch sleeve hub
nut with the special tool.
09920· 53710: Clutch sleeve hub holder
• Remove the washer
<D
and primary driven gear assem ·
bly
<y.
• Remove the spacer
@
and washer
@.
• Remove the kick id le gear
®
by removing the circlip .
• Remove the kick shaft assembly
®.
• Remove the oil pump driven gear
Q)
by removing the
eire
lip.
• Remove the pin
@.
CAUTION:
Do not remove the oil pump No .1 before separating the
crankcase.
• Remove the gearshift shaft
®.
• Remove the cam driven gear
@)
by removing the cam
guide
®.