Feature Interactions; Call Log; Personal Ring Group (Prg); Firmware Updates - Mitel 5610 IP Dect Stand Configuration And Administration Manual

Feature Interactions

Call log

If the device is part of a personal ring group or suite services, calls that are answered by other
devices in the group or suite will show up as missed calls on the handset. This is a common problem
with call log capabilities.
If a prefix digit is required to dial internal or external calls that have been logged, then you cannot dial
directly from the call log. This is a common problem with call log capabilities.

Personal Ring Group (PRG)

The handset cannot push or pull calls to other devices. If a MiNET device is in the PRG, it can push
or pull calls to/from the SIP device.
Maintenance

Firmware Updates

Firmware updates are provided via the Mitel Online Software Download site. You download new
firmware files from the Mitel Online Software Download site and install them on a tftp server in your
network. The IP DECT Stand automatically detects the firmware on the tftp server and then
downloads them to all handsets that are associated with the stand.
You must configure the stand via the Configurator web interface to poll (check) your tftp server for
new firmware. You can configure the stand to poll the tftp server:

every day at a specific time (absolute schedule), or

on a regular basis, for example every hour (relative schedule).

Download the Firmware

1. Access www.mitel.com
2. Log into your Mitel Online account.
3. Under Technical, click Software Downloads.
4. Scroll down the list of products and click Wireless.
5. Click 5610 IP DECT Handset.
6. Launch the .pdf of the Release Notes and review the contents of the firmware update.
7. Save the 5610 IP DECT firmware update files to the root directory on your tftp server. Save all
files with .txt and .fwu file extensions to the tftp server. Do not save the .pdf files.

Schedule Automatic Firmware Updates

1. Log into the Mitel IP DECT Stand - Configurator web interface.
2. Click Management Settings.
3. Under Management Settings, set the "Management Transfer Protocol" field to "TFTP".
4. Under Firmware Update Settings, complete the fields:
47