Deregistering A Handset - Mitel 5610 IP Dect Stand Configuration And Administration Manual

Network not available is presented to the user when the IP DECT Stand experiences some network
problem. This can be due to an unplugged Ethernet cable, furthermore are most HTTP/1.1 response
codes are presented to the user as a network error.
Code 3: VOIP_FWU_STATUS_UNKNOWN
Code 3 can indicate that the firmware file is not found on the firmware update server (HTTP/1.1 404).
Code 4: Firmware files too big
The firmware update file is too big.
Code 5: Timeout waiting for file
The server is busy and cannot process the get request within a reasonable time.
Code 6: Server not specified
Firmware update server is not specified.
Code 7: VOIP_FWU_STATUS_UNSPECIFIED_ERROR,
Code 7 covers a lot of misc. errors e.g. wrong format for the downloaded firmware update file.
Code 8: Illegal use of the Firmware updates API
Abuses of the firmware update API.
Code 9 Syntax error found in the DirFile
The DirFile contains all information needed for a firmware update; this includes information about
code size, link date, languages and so on. Code 9 indicates that there is a syntax error in the DirFile.
Code 10: Unknown format of DirFile
The downloaded DirFile is of an unknown format. This could indicate that the IP DECT Stand is
downloading firmware from a wrong folder on the firmware update server.
Code 11: Server name lookup failed
The DNS server cannot determine the IP address for the provided firmware update server.
Code 12: Authentication failed
The HTTP request for the DirFile or firmware files failed with a HTTP/1.1 401 response code. This
indicates that either the username or password is incorrect.

Deregistering a Handset

To deregister a handset from an IP DECT Stand:
1. From Idle mode, press the OK key, select Settings, and then press the OK key.
2. Select System settings and press the OK key. When prompted for a PIN code, enter the PIN
code (default 0000), and then press the OK key.
3. Select Handset settings and press OK.
4. Select Deregister handset and press OK.
5. Deregister Handset? is displayed. Press Yes. Once the handset is deregistered, the two semi
circles in the top left corner of the display both turn black.
6. Press Back repeatedly to return to the main display. The autoregistration message will appear in
the handset display.
Note: To register the handset with the IP DECT Stand again, place the handset in the cradle and
reset the stand (gateway) by pressing the RESET button on the back of the stand for 2 to 3
seconds.
49