Mitel 5624 Quick Reference Manual

MITEL
5624 Wireless Handset
Display Icons
Signal Strength
Battery Status
Voice Mail
Microphone Off
Loudspeaker On
Loudspeaker Off
Sound Off
Headset Connected
New Message
New Message, Important
New Message, alarm priority
M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2012, Mitel Networks Corporation. All other products and services are the trademarks of their respective holders. All rights reserved.
1 Multifunction/Alarm Button
2 Earpiece Speaker
3 Volume Button (up)
4 Volume Button (down)
5 Mute and PTT Button
6 Soft keys
7 Call Key
8 Five-way Navigation Key
9 Voice Mail Access
10 Key Lock and Upper/Lower Case
11 Microphone
12 Space
13 Sound Off Key
14 Tactile Indicators
15 End Key and On/Off Key
16 Color Display
17 Headset Connector
18 LED
Read Message
To contacts
Missed Call
Incoming Call
Outgoing Call
Call Diverted
System Connection
Key Lock
Phone Lock
Personal Alarm
Turning the Handset On/Off
1. Press and hold the On-hook key
until "Switch on/off is displayed.
2. Press "Yes/No."
Making a Call
Dial the number and press . The name of
the called party is displayed if available.
OR
Press to open the call list and use the
Navigation key to scroll the list of your last
twenty calls. Press Call or to dial.
OR
1. Press the Menu soft key.
2. Select Contacts, and select Call
Contact.
3. Select a contact from list.
4. Press or Call to dial the number.
Answering a Call
• Press to answer a call in normal
mode.
OR
• Press the Handsfree key to answer
in speaker mode.
Ending a Call
• Press to end a call.
Placing a call on Hold
1. Press the More soft key.
2. Select Hold to put the call on hold.
To retrieve the Held call:
1. Press the More soft key.
2. Select Retr to retrieve the call on hold.
QUICK REFERENCE GUIDE
Transferring a Call
1. Press the More soft key.
2. Select Transf. to New.
3. Dial the number to which you want to
transfer the call.
4. Press OK.
Conference
1. Press the More soft key.
2. Select New Call to put the current call on
hold.
3. Dial the number of the third party.
4. Press Select.
5. Press More.
6. Select Conference.
Rejecting a Call
• When the ring signal sounds, press
Call information will be stored in the
Call list.
Adjusting Volume Levels
To adjust the earpiece volume
during a call:
• Press upper and lower volume
buttons to increase/decrease volume.
To change the ringer volume:
• In the main menu, select Settings.
• Select Sound & Alerts.
• Select Volume.
• Use the navigation key arrows to adjust
selected volume and press Back to save.