Pin Protection Of Handset Menus; Registrations Administration - Mitel 5610 IP Dect Stand Configuration And Administration Manual

Configuration and Administration Guide

PIN Protection of Handset Menus

This setting is used for adding pin code protection of the following handset menus:

VoIP settings

Network settings menu

System settings menu

Telephony Settings | VoIP line

Telephony Settings |Call groups.
Pin protection can be enabled and disabled individually using the configuration parameter
PINCODE_PROTECTED_SETTINGS which is a bit mask field.
Pin code protection is enabled by writing 1 and is disabled by writing 0 in the corresponding bit field.
The values in three most significant bits are reserved for future use. Currently the values are ignored.
The default value is 0x00 disabling pin code protection on all the settings.
The popup in idle mode announcing new firmware will not be displayed when the system settings
menu is pin code protected and the popup shown when NAT provisioning fails will not be displayed
when the internet settings menu is pin code protected.

Registrations Administration

DECT registrations can be administered by assigning a specific handset to a specific handset ID. This
feature is useful when configuration of e.g. call-groups and outgoing line is different for each handset.
Use the following parameters:
Name
DECT_SUBS_MATCH_IPEI
DECT_SUBS_1
...
DECT_SUBS_8
Bit Setting
0 (LSB) VoipSettings
1 VoipLine
2 CallGroups
3 SystemSettings
4 NetworkSettings
5 Reserved
6 Reserved
7 (MSB) Reserved
Possible values
0,1 [DISABLE,
ENABLE]
<IPEI>
...
28
Description
Registration administration
feature.
IPEI value for Handset no. 1
...
IPEI value for Handset no. 8