Mitel 5610 IP Dect Stand Configuration And Administration Manual page 31

The web server gives access to the following additional settings:
Name
SRV_0_SIP_URI_DOMAIN_CONFIG
SRV_0_SIP_UA_DATA_SERVER_PORT 5060 (default) Defines the listening port of the
SRV_0_SIP_UA_DATA_SERVER_TYPE 0 (default)
SRV_0_SIP_UA_DATA_SERVER_IS_L
OCAL
SRV_0_SIP_UA_DATA_REREG_TIME
SRV_0_SIP_UA_DATA_PROXY_PORT
SRV_0_DTMF_SIGNALLING
SRV_0_SIP_UA_CODEC_PRIORITY
SUBSCR_0_SIP_UA_DATA_VOICE_MA
ILBOX_NAME
SUBSCR_0_SIP_UA_DATA_VOICE_MA
ILBOX_NUMBER
Values Description
This parameter specifies how a
0 (default)
destination URI of the format
SIP:<user>@<domain> for an outgoing
call must be specified with respect
to the <domain> part.
Possible values are:
0: If application omits <domain> the
value from the Domain parameter will
be added.
1: Application must specify full
URI.
2: Doesn't matter what application
defines, the <domain> will be
replaced by Domain parameter
extern proxy-server / registration-
server port.
Specifies the type of server.
Allowed values are(bitfield):
1 : Voice server (bin: 00000001)
2 : EMS
4 : Infopush server(bin: 00000100)
3600 (default) Specifies the time between re-
registration at reg-server. Time in
seconds.
Specifies how to transmit DTMF
0 (default)
signalling.
0: In-band generation, 1: SIP-Info,
2: RTP Named Event (RFC2833).
1, 0, 2, 4, PCMU 20ms (0), PCMA 20ms (1), iLBC
0xFF (default) 20ms (2), iLBC 30ms (3), G729AB (4)
It is not possible to select both
iLBC 20ms and iLBC 30ms in the same
priority list.
Unused entries must be 0xFF (255).
String (max 40 Voice Mailbox uri like
characters) sip:alice@vmail.example.com
Voice Mailbox number
String (max 22
characters) Sip address/ phone number used when
listening to messages
25
(bin: 00000010)