Mitel 5610 IP Dect Stand Configuration And Administration Manual page 19

13. Under Outgoing Identity to be used for,
Assign an account to each registered handset. If you want unique outgoing identities for
-
outgoing calls from each handset, assign a different account number to each handset.
For example, assign Handset 1 with Account 1, Handset 2 with Account 2, and so forth.
- Enter the handset name that you want displayed on the called phone.
Enter the IPEI of the handset that you recorded on page 9.
-
Leave DND (Do Not Disturb) set to disabled.
-
Leave CW (Call Waiting) set to disabled (recommended setting). See CW (Call Waiting)
-
on page 18 for further details.
Set the Join calls allowed option to Enable to permit conferencing.
-
- Set the Match IPEI to Handset to Enable.
14. Click SAVE CHANGES at the bottom of the screen.
15. In the left frame of the configurator web interface, click Time Settings.
Enter the hostname of a Time Server on the internet, for example: "clock.mitel.com" or
-
"pool.ntp.org"
- Enter the time server refresh interval, for example: 255
- Set the time difference between Greenwich Mean Time (GMT) and your current location.
For example, if you were located in New York, USA, which observes EST you would set
the Timezone field to – 5:00 hours.
- Set the Daylight Savings Time (DST) settings for your timezone as required.
16. Click SAVE CHANGES.
17. Click REBOOT. While the system reboots "Searching for Gateway" appears in the display. After
approximately 30 seconds, the main display appears on the handset. Basic handset configuration
is complete.
13