Table of Contents
Advertisement
NOTE:
Do not use the registered port numbers to avoid clashes. It is recommended to use the port numbers within
the range of 1124-7999 (the port numbers from 0 to 1123 are officially registered for different protocols,
services, applications).
[Internal Port]: enter the port number which is currently used for access to the camera over
a local network.
[IP Address]: enter the port number of the IP camera you are setting.
Create the rule for HTTP port (Pic. 7.7).
Step 4: click [Save]. The rule is added (Pic. 7.8).
Step 5: create the rule for RTSP port in the same way (Pic. 7.9).
N120 Installation User Manual
Chapter 7. Accessing the Camera over the Internet
Pic. 7.7
Pic. 7.8
63
Advertisement
Table of Contents
