Chapter 6. Setting Up The Wireless Connection For Windows 7; Overview Of Connecting N120 To A Wireless Network; Connecting To A Wireless Network Using Wps; Connecting To A Wireless Network By Configuring The Camera Through The Web Interface - Beward N120 Installation & User Manual

Chapter 6. Setting up the Wireless Connection for Windows 7

6.1. Overview of Connecting N120 to a Wireless Network

To make the N120 IP camera work together with your computer, your laptop, and other
devices in your wireless network, you need to connect this camera to the network according to the
wireless network parameters. To do so, you can use either of the following methods:
 Using WPS, which allows you to set up a secure wireless connection automatically.
IMPORTANT!
To connect the camera through WPS, the router used for the Wi-Fi connection must support this
technology.
 Without using WPS. To do so, you need to define the Wi-FI settings through your
router's setting menu (for more information, please see your router's manual) or through
other devices connected to the router (for example, a laptop).

6.2. Connecting to a Wireless Network Using WPS

To connect the camera to a wireless network using WPS, you can use either of the
following methods:
 Through the web interfaces, configuring both the camera and your router.
 Pressing the WPS buttons on both devices, so there is no need to configure them
through their web interfaces.
These methods are described below in this manual.
6.2.1. Connecting to a Wireless Network by Configuring the Camera through the Web
Interface
Access the camera using any of the ways described in paragraph 5.3.
In the opened window, enter the camera's username and password (Pic. 6.1).
IMPORTANT!
The default username is admin, the default password is admin.
N120 Installation User Manual
Chapter 6. Setting up the Wireless Connection for Windows 7
37