There are two ways of wireless network setting:
Automatic – [Connect] button
Manual – [Manual] button
If there is a DHCP server assigning dynamic IP addresses to devices in your wireless
network, then you can choose the first way. In this case click the [Connect] button. The network
can be password-protected, therefore in the opened window you may need to enter a password to
connect to. Fill the [Passphrase] and [Re-type] fields (Pic. 6.16). Values of the [Authentication]
and [Encryption] parameters are defined automatically.
N120 Installation User Manual
Chapter 6. Setting up the Wireless Connection for Windows 7
Pic. 6.15
Pic. 6.16
50