Restoring The Network Settings Of The Computer To Their Previous Values - Beward N120 Installation & User Manual

To configure the network settings through the web interface, click the
button and go to the Network - Basic (Pic. 5.28).
In the [TCP/IP] subsection you need to enter such values of the IP address and other
network parameters that it provided joint work of the camera and other devices in the same subnet
(Pic. 5.28).
NOTE:
Contact your system administrator if you need assistance.
Click [Save] to save the changes.
Configuring the camera's network settings is completed.

5.6. Restoring the Network Settings of the Computer to Their Previous Values

To restore the wired connection settings to their previous values, follow the steps below.
Go to Start – Control Panel (Pic. 5.29).
N120 Installation User Manual
Chapter 5. Setting up the Wired Connection for Windows 7
Pic. 5.28
[SETTING]
31