Installing The Camera; Wired Connection To A Network - Beward N120 Installation & User Manual

4.3. Installing the Camera

Step 1: attach the bracket to the surface using 3 self-tapping screws.
Step 2: loosen the bracket screws to move the camera to the desired position.
Step 3: attach the camera to the bracket, adjust the tilt angle and fasten the camera (Pic
4.2).

4.4. Wired Connection to a Network

Step 1: provide the camera with power using the included 5 V, 1 A power supply:
Step 2: use the supplied RJ45 cable to connect the camera to a network (a LAN port of the
router).
You can purchase a network cable separately or if you have the materials, tools and skills,
you can make a network cable by yourself.
A straight RJ-45 cable (UTP category 5e)
The table below shows an example of a patch cord to connect the camera to a computer or
a network switch.
N120 Installation User Manual
Chapter 4. Installing the Camera and Cables' Connecting
Pic 4.2
11