Equipment Setting For Work With Dyndns - Beward N120 Installation & User Manual

Step 5: if your domain name is activated successfully, you will see a confirmation page
(Pic. 7.23).
Step 6: your domain name is created.

7.4.4. Equipment Setting for Work with DynDNS

Now you need to set your camera according to your registration details at the DynDNS
service (see paragraphs 7.4.2, 7.4.3).
The IP camera and a router (in case of your camera is connected to the Internet through a
router) can both update the IP address at DynDNS server.
To set your camera to work with DynDNS service, please follow the steps below:
IMPORTANT!
Your camera must be connected to the Internet directly.
Step 1: enable the [DDNS] option at SETTING – Network – Advanced – DDNS.
Step 2: select a DDNS provider in the [Server name].
Step 3: enter the username that you chose at a registration in the [User ID].
Step 4: enter the password that you chose at a registration in the [Password].
Step 5: re-type the password in the [Re-type password].
Step 6: enter the domain name that you chose at a registration in the [Host name].
N120 Installation User Manual
Chapter 7. Accessing the Camera over the Internet
Pic. 7.23
74