Ip Address Filter - Beward N300 Operation User's Manual

7.3.1. IP Address Filter

You can allow access to the camera from specific IP addresses, which provides additional
security to your data. To enable or disable this option choose the corresponding value in the [IP
Address Filter] field (Pic. 7.10).
The following settings are available: Filter Type and IP Address Range.
Filter Type:
Allow: access to camera web interface is allowed only from the addresses mentioned in
the IP range blank.
Deny: access to camera web interface is forbidden from the addresses mentioned in the IP
range blank.
IP Address range: a list of IP (or just one IP) which were added to filter.
For working with the [IP Address filter] function you should add IP addresses by pressing
the [Add] button (Pic. 7.11).
N300 Operations User Manual
Chapter 7. The [SETTING] Menu: System
Pic. 7.10
Pic. 7.11
28