Table of Contents
Advertisement
IMPORTANT!
It is acceptable to share the same HTTP port between your IP cameras using port forwarding on the virtual
server. However, you must specify a unique RTSP port number for each camera in order to access them
over the Internet. For example, the port 3001 of the camera 1 should be forwarded to the port 3001 of the
router, the port 3002 of the camera 2 - to the port 3002 of the router and so on.
Step 6: if you use several cameras, repeat steps from 2 to 5 for the other ones (Pic. 7.10).
The router configuration is complete.
N120 Installation User Manual
Chapter 7. Accessing the Camera over the Internet
Pic. 7.9
Pic. 7.10
64
Advertisement
Table of Contents
