Table of Contents
Advertisement
It needs about 30 seconds to new settings took effect.
6.3.3. Verifying the Wireless Network Configuration without Using WPS
To verify the wireless network settings of your camera and your computer, you should
access the camera through Internet Explorer.
Launch Internet Explorer. To do so, go to Start – All Programs and click [Internet
Explorer].
Enter the camera IP address in the address field (Pic. 6.20).
IMPORTANT!
To verify the wireless network configuration, use the IP address that was assigned to your camera in
paragraph 6.3.2.
Enter the camera's username and password, then click [OK] (Pic. 6.21).
IMPORTANT!
The default username is admin, the default password is admin.
N120 Installation User Manual
Chapter 6. Setting up the Wireless Connection for Windows 7
Pic. 6.19
Pic. 6.20
53
Advertisement
Table of Contents
