Table of Contents
Advertisement
Chapter 5. Setting up the Wired Connection for Windows 7
To make the N120 IP camera work together with computers, laptops and other devices in
your local network, you need to connect this camera to the network according to the network
parameters. This chapter explains how to define the network parameters.
NOTE:
The connection establishment process is shown for OS Windows 7 Ultimate. Despite titles of system menus
and options may differ from the titles of system menus and options that appear in other versions of
Windows, the procedure of the connection establishment process is universal.
5.1. Defining the Local Network Parameters for Wired Connection
When connecting the camera using an Ethernet cable, you need to define local network
parameters.
NOTE:
It is necessary to do in case of using wireless connecting without WPS function also.
To do so, go to Start – Control Panel (Pic. 5.1).
N120 Installation User Manual
Chapter 5. Setting up the Wired Connection for Windows 7
Pic. 5.1
13
Advertisement
Table of Contents
