Step 3: connect the IP camera to the Ethernet network.
If everything is configured properly, the camera should be available over the Internet.
The following settings were used in the provided example:
IP address: 80.65.23.173
Subnet mask: 255.255.255.252
Default gateway: 80.65.23.174
Preferred DNS server: 80.65.20.1
Alternate DNS server: 80.65.16.1
To access the camera over the Internet, enter the following in the address field of your
browser: http://<IP>:<Port>, where <IP> is the IP address of the camera, <Port> is the port
number that is used for HTTP connection to the camera (the default value is 80). In the provided
example, the following should be entered in the address field: http://80.65.23.173.
NOTE:
You do not need to enter a port number if you are connecting through the default HTTP port 80.
N120 Installation User Manual
Chapter 7. Accessing the Camera over the Internet
Pic. 7.1
56