Beward N120 Installation & User Manual page 40

The [Configure via] item is located below the address fields. It offers two methods for
setting up a wireless connection:
 [PBC]: to set up a secure wireless connection, press the WPS button on both devices.
After that, wait until the settings are transmitted between your camera and your router.
Commonly it takes about 2 minutes to transmit and apply the network settings.
 [PIN]: to set up a secure wireless connection, enter your camera's security PIN in the
corresponding field of your router's WPS setup window. Once the PIN is entered, the
network settings will be transmitted only to the camera that generated the PIN. The PIN
is displayed next to the [PIN] option. To create a new PIN, click the [Generate new PIN]
button (Pic. 6.3).
NOTE:
The power LED is blinking red when the camera is searching for a network and setting up the connection.
IMPORTANT!
Detailed information on how to apply a PIN to the particular model of a router is not provided in this
manual. Check your router's instructions for details. You can find the instructions on your router
manufacturer's website or it may be included with your router.
N120 Installation User Manual
Chapter 6. Setting up the Wireless Connection for Windows 7
Pic. 6.3
39