Verifying The Connection Settings - Beward N120 Installation & User Manual

If the IP settings were specified manually, use the [Use the following IP address] and the
[Use the following DNS server addresses] options and complete the required fields (see
paragraph 5.1), then click [OK] (Pic. 5.35).

5.7. Verifying the Connection Settings

To verify the network settings of your camera and your computer, you must access the
camera through Internet Explorer.
To launch Internet Explorer go to Start – All Programs and click [Internet Explorer].
Enter the IP address of your camera in the address field (e.g. http://192.168.0.99) (Pic. 5.36).
If the settings are correct, an authorization window will appear. Enter the username and
password, then click [OK] (Pic. 5.37).
N120 Installation User Manual
Chapter 5. Setting up the Wired Connection for Windows 7
Pic. 5.35
Pic. 5.36
35