Installation; Supplied Accessories; Operating Conditions; Power Supply - Sony RM-PP1 Installation Manual

Program play box
Hide thumbs Also See for RM-PP1:
Table of Contents

Advertisement

1-1. Supplied Accessories

CD-ROM ......................................................................... 1
. Program Play Box Control Software
. Operation manual (PDF)
Operation guide ............................................................... 1
Installation manual .......................................................... 1
Screws for rack mounting (B4 x 8) ................................. 10

1-2. Operating Conditions

c
Good air circulation is essential to prevent internal heat build-
up. Place the unit in location with sufficient air circulation.
Do not block the ventilation holes of the cabinet and the
front and rear panels.
Operating temperature: 5dC to 40dC
Operating humidity:
20% to 90% (non-condensing)
_20dC to 60dC
Storage temperature:
Locations to avoid:
. Areas where the unit will be exposed to direct sunlight
of any other strong lights.
. Areas near heat sources.
. Dusty areas or areas subject to vibration.
. Areas with strong magnetic field.
. Areas with much electrical noise.
. Areas with much static electricity.
. Areas that is impossible to find a specified room for
installation. (Refer to "1-4. Installation Space".)
c
Fix the unit securely to avoid slipping if the unit is not
operated at horizontal place.

1-3. Power Supply

1-3-1. Voltage and Power Requirements

This unit's power line has a switching regulator.
c
Be sure to operate the unit within the range of following
power voltage.
RM-PP1
Section 1

Installation

Power voltage:
Power frequency:
Power consumption: 45 W (70 VA)
Rush current:
n
AC power supply is required a capacity which is commen-
surate with rush current.
If the capacity of the AC power supply is not enough, the
breaker of AC power of a supply side may operate or this
unit may not operate normally.

1-3-2. Recomended Power Cord

This unit does not come with a power cord.
To get a power cord, please contact your local Sony Sales
Office/Service Center.
w
. Use the approved Power Cord (3-core mains lead)/
Appliance Connector/Plug with earthing-contacts that
conforms to the safety regulations of each country if
applicable.
. Use the Power Cord (3-core mains lead)/Appliance
Connector/Plug conforming to the proper ratings (Volt-
age, Ampere).
If you have questions on the use of the above Power Cord/
Appliance Connector/Plug, please contact your local Sony
Sales Office/Service Center.
w
. Never use an injured power cord.
1 Power cord 125 V 10 A (2.4 m): ! 1-557-377-11
2 Plug holder (Brown):
1
AC 100 to 240 V ± 10%
50 Hz or 60 Hz
Power voltage 100 V IN: 15 A
Power voltage 240 V IN: 60 A
3-613-640-01
2
AC inlet
1-1

Advertisement

Table of Contents
loading

Table of Contents