Call Forwarding External; Analogue (Fxos) - TIPTEL .com 410 Installation Manual

Note: External and internal numbers may be identical.
With this telephone system DDIs must not be identical with internal ex-
tension numbers. You can, however programme them this way.
In case you also received the DDI „0" from your provider, you must as-
sign this DDI to an extension by all means. This can of course also be
the extension which has been defined as operator.

Call forwarding external

Call forwarding can be set up for each MSN at a multipoint interface. The „number for
call forwarding" item informs you how many MSNs have call forwarding enabled. In
order to modify the call forwarding, select the desired MSN and enter the desired
data in the lower entry fields. Should several external S0-ports be used, individual
settings are possible for each S0. If the call forwarding is reprogrammed via a paral-
lel-connected terminal unit, the settings of the telephone system will also be changed
accordingly, provided that the CFI ISDN feature is available. If the CFI feature is not
available, the reprogrammed parameters will automatically be reset within the tele-
phone system after a short delay (depending on the exchange office).
You can choose among the following settings:

Call Forwarding Unconditional (CFU)

Call Forwarding On Busy (CFB)

Call Forwarding No Reply (CFNR)
Requirements: Connection to a multipoint interface. This feature has been enabled.
Entry of the external MSNs.
Call forwarding external (CFI)
Here you can set whether or not a query of the current call forwarding external
should be carried out. For public switches that do not support the call forwarding
function via the CF ISDN service, it is recommended to set the inquiry option to
„OFF".

Analogue (FXOs)

Note: This menu is only available with a tiptel 2FXO-Module installed
Menu: Ports
69