Assignment Of The Functional Keys - TIPTEL .com 410 Installation Manual

PIN for hands-free mode
You can define a 4-digit PIN for hands-free operation here. The default value is
„0000".
PIN for room monitoring
You can define a 4-digit PIN for room monitoring here. The default value is „0000".

Assignment of the functional keys

Status CO-line access
For this function, the LED indicates whether a CO-line is available for an external call.
Those external S0 connections that have been assigned to the subscriber will be
taken into account. It is therefore possible that no external line is available even
though not all external S0 connections are busy.

LED on =>
Action: none

LED off =>
Action: pressing the key activates the hands-free mode and provides a CO
line (external dialling tone after standard exchange connection). The hands-
free mode is not automatically activated when the handset is lifted.
 LED flashing => outside line authorisation is withdrawn
Action: none
Note: Do not assign this function to any key if the CO-line access for this sub-
scriber has been blocked (menu item „exchange authorisation for out-
going calls": none). Otherwise, this key will be flashing permanently.
For example, the exchange authorisation can be withdrawn because
the subscriber concerned has exceeded the limit of his charge account.
CO-line access with specific MSN/DDI (line key)
Here you specify which MSN/DDI of your telephone system should be used for an
outgoing external call. As the MSNs/DDIs are assigned to certain external S0 connec-
tions, you determine at the same time which port should be used for the telephone
call. The status is indicated by the LED as follows:

LED on =>
Action: none

LED off =>
Action: Pressing this key activates the hands-free mode and provides an ex-
ternal line (dialling tone after destination exchange connection). The hands-
free mode is not automatically activated when the handset is lifted.
Note: This setting permits access for this subscriber to an otherwise blocked
Menu: Subscriber
no CO line available
an external line is available
this MSN/DDI is being used for the telephone call
Standby mode
87