Extensions Allocated To Subscriber - TIPTEL .com 410 Installation Manual


No exchange authorisation

National exchange authorisation

International exchange authorisation
Special numbers (where available and released) and emergency numbers can over-
ride the exchange authorisation set.
Requirement: An MSN/DDI for outgoing calls must be selected for the subscriber.
Call forwarding targets
This menu is used to programme the authorisation for call forwarding. In case of ex-
ternal call forwarding destinations, the restrictions via dialling control will be taken
into account. Exchange authorisation restrictions will not. The following authorisation
levels are available:

No call forwarding permitted

Call forwarding permitted only to internal destinations

Call forwarding permitted to internal and external destinations
Outgoing number (CID) in case of forwarded calls
Here you select whether the caller's number or the system's call number is to be
transmitted.
Dialling control
This menu is used to activate the global setting for the subscriber.
LCR
This menu is used to activate the global LCR functions for the subscriber.
Charge account, limit
It is possible to activate a charge account for each subscriber. As soon as the sub-
scriber exceeds his / her charge limit, no further external calls (except emergency
calls) can be made. Active calls will not be interrupted after exceeding the charge
limit. A negative credit is indicated instead.
Day/night switching (web configuration)
This menu is used to activate the day/night switching for the subscriber.

Extensions allocated to subscriber

Here you can define at which extensions the selected subscriber is to be signalled.
Simply select the desired extensions in the table that is displayed.
Menu: Subscriber
81