Call Forwarding - TIPTEL 85 System S0 User Manual

For safety reasons, this function is protected by a switching code. You can obtain a
release code from your system administrator. Please note that this does not relate
to your telephone's device PIN.
You will be asked to enter the extension number of the device, which you would like
to switch to speaker/hands-free mode:
Hands-free target
Please enter number
23_
Manager (office)
Confirm your entry by pressing OK. After entering the correct switching code, the
function will be switched on.
A corresponding message will appear on the target device's display screen.
Call target indication
Main menu  Settings
If you have activated the Call target indication setting, the number that the caller
originally dialled will be indicated together with the caller's number. This can be
differentiated from your telephone number on the basis of call forwarding or
corresponding call distribution.
If you want to activate this indication (for incoming calls), switch the function to on.

Call forwarding

Main menu  Settings
Call forwarding allows you to transfer a call received on your extension to another
target. This can be configured separately for each user (MSN).
If call forwarding is activated in your terminal, a "C" icon will be shown on the
display screen, when the telephone is in standby mode. A special dial tone will
sound when you pick up the handset.
Settings
System functions

 Call forwarding
78
Call target indication
