Select Group Member; Allocation For Incoming External Calls - TIPTEL .com 410 Installation Manual

phone. The caller hears the „subscriber busy" signal as a rejection or is
transferred to the entered rejection location.

Linear (chain call without time out)
this option means that only the first subscriber (Index 01) from the sub-
scriber list receives the signal for a call. If this subscriber is busy, the next
subscriber on the list is called. If no other subscribers are available in the
list, the caller receives the „subscriber busy" signal or is transferred to the
rejection location.

Linear (chain call) with time out
This option means that only the first subscriber (Index 01) from the sub-
scriber list receives the signal for a call. If this subscriber is busy or he does
not accept the call within 10s, the next subscriber on the list is called. If no
other subscribers are available in the list, the caller receives the „subscriber
busy" signal or is transferred to the rejection location.

Depends on breaks
This option means the subscriber who has not made a call for the longest
period of time receives the signal. If this subscriber is busy, the next sub-
scriber on the list is called. The function is reset when a group subscriber
logs in. If no other subscribers are available in the list, the caller receives the
„subscriber busy" signal or is transferred to the rejection location.

Load dependent
This option means the subscriber who has the lowest total call time receives
the call. If this subscriber is busy, the next subscriber on the list is called.
The function is reset when a group subscriber logs in. If no other subscrib-
ers are available in the list, the caller receives the „subscriber busy" signal
or is transferred to the rejection location.
Central phone
Assign the rejection location for the group here. In case you want to reject to an in-
stalled tiptel VCM-Module, just install a pseudo subscriber and enable his answering
machine with a very short delay. Of course you can also reject to an existing sub-
scriber with activated answering machine.

Select group member

Select the individual group subscribers here. For dynamic groups you can also spec-
ify the current status of the group subscribers. But please beware of the fact that this
is subject to change as group members are allowed to log on/off themselves.

Allocation for incoming external calls

Here you can set via which external MSNs or DDIs the group can be called.
Menu: Subscriber
78