TIPTEL .com 410 Installation Manual page 54

Exception phone numbers / MSNs / DDIs of the telephone system
Only enabled in case you selected „All" first. You may define up to 3 phone numbers
/ MSNs / DDIs of your telephone system as exception, not to be verified by the call
filter.
Filter criteria

Caller without number = Call is being received without a phone number
transferred

Caller without number, except 3.1 kHz audio = Call is being received with-
out a phone number transferred. Caller with identification 3.1 kHz (e.g. origin
from the analogue telephone network) will not be filtered.

Number suppressed = Call with identification „Restricted"

Caller's number = Here you may enter up to 10 phone numbers the filter
function shall apply to.

Area code of caller = Here you may enter up to 10 area codes the filter func-
tion shall apply to.
Remark: The filter can only work orderly if your telecom provider supports the
needed features.
Caller's number
Enabled only in case you selected „Caller's phone number" first. Here you may enter
up to 10 caller's phone numbers the filter function shall apply to.
Area code of caller
Enabled only in case you selected „Caller's area code" first. Here you may enter up
to 10 area codes the filter function shall apply to.
Priority
Call filters with priority „1" have the highest, those with priority „5" have the lowest
priority. Selecting a priority is absolutely necessary when criteria of different call filters
you set are overlapping with respect to the same phone number / MSM / DDI of your
telephone system (or for all calls).
If filter criteria matches caller, then
Your telephone system will not accept that call. In case of an ISDN multipoint access
terminal units in parallel may accept that call.
Forward call to drop target = The call is being signalled only to one specific sub-
scriber.
Menu Settings
54