Voip (Sip); Subscriber List - TIPTEL .com 410 Installation Manual

Menu: Ports
Advice of charges
This menu is used to set whether charges shall be signalled at your analogue port".
If a fax machine or a modem is connected, the charging signal should be disabled in
order to avoid the interruption of connections.
Call waiting signal allowed
This menu is used to allow or block the call waiting signal. The setting can also be
made directly via a telephone on an analogue extension by dialling *43# = on and
#43# = off.
If a fax machine or a modem is connected, the call waiting signal should be disabled
in order to avoid the interruption of connections.
Phone number transmission
This menu is used to allow or block the transmission of phone numbers. The setting
can also be made directly on the telephone at an analogue extension by dialling
*30# = on and #30# = off.
Outgoing MSN
Here you can select the desired outgoing internal phone number (for example sub-
scriber 41). For external calls the subscriber will be transferred accordingly to the ex-
ternal MSN.
Kind of CLIP signalling
This menu is used to define whether the phone number shall be signalled at the ana-
logue extensions via DTMF or FSK. In German-speaking countries, FSK is generally
used. The relevant information can be taken from the User's Manual of your analogue
telephones.

VoIP (SIP)

Note: This menu is only available with a tiptel VoIP-Module installed

Subscriber list

The overview page shows you a window displaying the status of all SIP accounts that
have been set up.
Choose a name from the SIP Account column. A window with all of the SIP account
settings is displayed.
The Phone number column always lists the first telephone number of a SIP account.
71