Entry Of Msn/Ddi - TIPTEL .com 410 Installation Manual

If the CD external function is activated, the call forwarding is carried out directly by
the external line. The disadvantages described above no longer occur. However this
service must be enabled.
Note: This service is not supported by every telephony network provider.
When more than one subscriber is being addressed external CD will
not be carried out. In this case call deflection is being carried out via the
second voice channel (B channel). This makes sure that - despite a call
deflection is carried out - all other extensions will continue ringing.
Basic number (only point-to-point connection)
For a point-to-point connection, it is additionally necessary to enter the basic number
of the telephone system. Enter the extension numbers for the point-to-point connec-
tion in the „enter MSN/DDI" menu.
With this telephone system DDIs must not be identical with the internal phone num-
bers (extension numbers). You can, however, programme it this way.
Operator
In this menu you can select one subscriber for the switchboard function. The follow-
ing calls will be routed to this subscriber:

calls for a DDI / MSN which has been assigned to no internal subscriber

calls for an unknown DDI

calls for this subscriber

Entry of MSN/DDI

In this menu you enter the corresponding MSNs for each external S0 connection. In
case of a multipoint interface, you are provided with up to 10 phone numbers (MSNs)
for each S0 connection. For a point-to-point connection, you have a basic number to
which extension numbers (DDIs) are added. Enter the requested DDI. One MSN/DDI
must not be assigned to several external ports. Furthermore you can assign a name
to each number. This name will be displayed in the „From/For Display", which is
available with system phones and internal voicemail systems.
Example:
Caller John (name taken from phone book) calls subscriber 50 via external MSN
4280. The telephone displays the name „John" in the first line while in the second
line „Call for MSN 1" (MSN 1 = 50) is being displayed. If you e.g. assigned the name
„Private" to MSN 4280, the telephone will display the name „Private" instead of „Call
for MSN 1".
Menu: Ports
68