TIPTEL .com 410 Installation Manual page 88

outside line (menu option „outside line permission for outgoing calls":
None) to an outside line via a special MSN/DDI!

LED flashing => an incoming call for this MSN/DDI

Action: Pressing the key activates the hands-free mode, and the incoming
call is picked up. The hands-free mode is not automatically activated when
the handset is lifted.
Internal destination
The subscriber's phone number (internal destination number) has to be entered here.
The status is indicated by the LED as follows:

LED on =>
Action: Pressing the key activates the hands-free mode and the other sub-
scriber's call is picked up (condition: a call pick-up is allowed according to
the other subscriber's settings, pick-up parameter: answering machine). The
hands-free mode is not automatically activated when the handset is lifted.

LED off =>
Action: Pressing the key activates the hands-free mode and the other sub-
scriber is called. The hands-free mode is not automatically activated when
the handset is lifted.

LED flashing => an incoming call for this subscriber
Action: Pressing the key activates the hands-free mode and the incoming
call is picked up (pick-up parameter: on). The hands-free mode is not auto-
matically activated when the handset is lifted.
Note: If the same subscriber receives a second call during an active conver-
sation (LED on), this status is indicated by a flashing LED. This means
that the second incoming call (waiting call) can be picked up.
Speed dialling key
It is possible to enter any destination number here. This destination number will be
dialled when the function key is pressed.
Call forwarding: unconditional
Enter the call number of the forwarding destination (internal or external) here. By
pressing the function key, direct call forwarding to the indicated subscriber is acti-
vated for your system telephone. Incoming calls are no longer signalled on your tele-
phone. The status is indicated by the LED as follows:

LED on =>

LED off =>
Menu: Subscriber
the subscriber is holding a telephone call
idle state
call forwarding is active
call forwarding is not active
88