Correcting The Image Brightness And Contrast; Correcting Images Automatically - Ricoh CX1 User Manual

Correcting the Image Brightness and
Contrast
You can use either [Auto] or [Manual] mode to correct the
brightness and contrast in still images you have shot and then
record the corrected images. [Manual] mode allows you to correct
the image by adjusting the histogram.
Note ----------------------------------------------------------------------------------------------
See P.60 for more information on the histogram display.
1
Press the 6 (Playback) button.
2
Press the ADJ./OK button !"#$ to display the file you
want to correct.
3
Press the MENU button.
• The playback menu appears.
4
Press the ADJ./OK button " to
select [Level Compensation]
and press the button $.
6

Correcting Images Automatically

5
Press the ADJ./OK button !" to select [Auto] and
press the button $.
• The original image appears at the
upper left of the screen and the
corrected image is shown on the right.
• If you select a file that cannot use level
compensation, an error message
appears and you are returned to the
playback menu.
• To cancel level compensation, press
the DISP. button.
6
Press the ADJ./OK button.
• Messages appear during the correction process, and then the
corrected image is recorded. The original image remains unchanged.
142
Level Compensation [Auto]
Cancel Ok